69
MAITENANCE E CLEANING
BSS-134
CHAP.- 10
Lubrication
Proceed with relative greaser inserting lubricant inside the greasers.
The bearings used are of watertight type and do not require maintenance.
However, the user is free to periodically grease, in particular in case of using the machine in extremely
dusty environments.
Check reducers
Check there are no oil/grease leaks on the reducers.
10.7 Routine and extraordinary maintenance
The routine maintenance entails:
1) checking the functioning state of the various parts,
2) eliminating or correcting anomalies, even those that, despite not constituting immediate danger or
technical bad service, can lead to inconveniences in case of their prolonging.
The extraordinary maintenance consists in the full replacement of machine parts when necessary.
For every routine maintenance intervention, below is the indicative frequency, calculated in hours of
functioning and a detailed description of the intervention procedure.
10.7.1 Routine maintenance sheets
Daily check, through visual check, the general wear conditions of the machine.
A table is attached:
Type of intervention Frequency (hours)
40 160 500
Mechanical interventions
Lubrication •
Check reducers •
Cleaning of compressed air fi lter •
Check belts •
Check sliding bar •
Check sliding guides •
Cleaning of frame •
Package evacuation band cleaning •
Cleaning the fruit feeding hopper •
Cleaning the sealing units •
120 500 1000
Electric interventions
Cleaning of fans/exchangers fi lters •
Inspect photocells •
General cleaning of the electric control board •
To Next Page
Loading...