Sorma BSS-134 - Page 77

,
MAITENANCE E CLEANING
BSS-134
CHAP.- 10
CLEANING THE SEALING PLIERS
The sealing pliers should be cleaned at the end of every working day to ensure maximum life of the
sealing unit and avoid incrustation deposits due to the melting of the plastic material which seeps in
the cogs [A], the punches [B] ad the knife [C] of the sealing pliers [S.inf.] and [S.sup.].
The sealing pliers must only be cleaned when are getting cool, and namely when
they are lukewarm.
1) Remove the R.H. and L.H. jigs [E] by means of the suitable screws [V].
S.inf.
E
A
S.sup.
E
B
C
S.sup.
S.
inf.
V
V