77
MAITENANCE E CLEANING
BSS-134
CHAP.- 10
2) Wipe the Tefl on-coated area, the knife [C] and the punches [B] by means of a damp sponge. If
necessary, use a plastic scraper taking care not to scratch the Tefl on coat.
N.B. = If the Tefl on coat has worn away by more than 50% on the COGS [A], it is
recommended to restore the Tefl on coat on the sealing pliers.
4) Wipe the slide guides of the sealing pliers [F] and the whole sealing pliers area with a damp sponge.
5) At completion of the cleaning operations, the parts must be dried and reassembled with the utmost
care and precision.
E
3) Clean the jigs [E] with an abrasive sponge, hot water and a detergent.
F
Pay ATTENTION to sharp
dies and knives during
cleaning operations.
To Next Page
Loading...