Sortimo GL4 User Manual

26
© Sortimo International GmbH
Divider for shelf tray:
You can position the dividers (A) in the available slot spaces according to your requirements.
• Pull divider (A) upwards and out.
• Remove the anti-slip mat (B).
• Pull the rear (C) and front (D) divider holder by the bottom inwards and out.
• Install divider holder in desired position and slide the dividers back in.
A
B
C
D

Sortimo GL4 Specifications

General

Brand	Sortimo
Model	GL4
Category	Tool Storage
Language	English