39
© Sortimo International GmbH
ProSafe gas cylinder holder
Danger!
Incorrectly secured gas cylinders can slip or fall over, causing them to leak or explode. Torn-free
gas cylinders can be thrown through the loading space during braking or an accident and injure
people.
Don’t load any lashing eyelet / lashing point with more than 200 daN.
In the event gas cylinders are being transported, the law specifies that
• the fittings must always be removed.
• the valves must be tightly closed.
• the locking flap must always be put in place and secured.
The ProSafe lashing rails can be used to securely attach gas cylinders to the van racking system.
Lashing gas cylinders:
• Hook the ProSafe hook of the ratchet strap on the ProSafe lashing rail.
• The upper ratchet strap is now attached on one side; proceed the same way with the lower
ratchet strap.
• Place the gas cylinder(s) into the vehicle and attach the ratchet belt on the other side.
• Tighten both ratchet straps.