45
© Sortimo International GmbH
Telescopic restraint pole
Telescopic restraint poles, used in conjunction with parallel lashing rails and lashing points in the
vehicle, are used to secure loads in the vehicle in a positive-locking manner. The telescopic restraint
pole is designed to secure a broad variety of loads in the van with its parallel lashing rails.
Caution!
Braking, accelerating, taking bends or swerving causes forces on the cargo. An unsecured load
can topple over or slip.
• Secure all objects in the cargo area against tipping and slipping.
• Secure cargo inside the van racking with a tight fit.
• Check that the load is secure before setting off every time.
Observe the applicable laws in accordance with StVO §22, 23 and StVZO §30, 31 relating to load
securing.
Inserting telescopic restraint pole:
• Insert the telescopic restraint pole in the lower lashing point (A).
• Pull the inner tube in the telescopic restraint pole upwards and insert it into the fixing rail.
Use slight pressure when doing so to brace the telescopic restraint pole (B).
Loosening telescopic restraint pole:
• Press the telescopic restraint pole against the top spring-loaded end and remove it at the
floor end (A).
• Then remove the telescopic restraint pole from the fixing rail on the roof spar (B).
To Next Page
Loading...
Need help?
General
