46
© Sortimo International GmbH
Ramp rail
Important!
The ramps are used to compensate height differences between the loading space and the road, or
between stair steps and may only be used with lightweight, hand-operated transport devices.
Maximum load:
The ramps are only allowed to be loaded with the maximum load-carrying capacity indicated on the
type plate!
Caution!
On the folding ramp rail, there is a risk of injury in the hinged area during folding.
Ramp rail 2000/2500 mm, foldable
Operation:
• Secure the vehicle from rolling away unintentionally.
• Put the ramp on and align it with the track width of the transport device.
• Secure the ramp using the securing bolts and the aluminium bracket.
To Next Page
Loading...
Need help?
General
