5
© Sortimo International GmbH
Information on the document
Caution!
Injury from lifting too heavy a load
The van racking system may be too heavy for one person, depending on the configuration. This
could result in minor injuries.
• Installation should be carried out by two persons.
• Ensure a safe working environment; park the vehicle on a flat and solid surface.
• If the vehicle is to be driven off normal roads, all screw connections need to be fitted
using an appropriate screw locking tool.
• When installing the van racking system, make sure that all existing service access points
(e.g. first-aid box, spare wheel) remain accessible after installation.
Information!
Depending on the configuration, several van racking systems are included in the delivery. We
recommend that you install them separately from each other.
Important!
Ensure that the specified screw fixing torques are adhered to.
M5 = 4 Nm ±10%
M6 = 7.5 Nm ±10%
M8 = 20 Nm ±10%
If other torques are required, they are specified in the instructions!
Intended use
The Sortimo “Globelyst” van racking system is designed for use in vans / panel vans due to its
durability.
The rack system is used to transport and store a wide variety of tools and materials.
To Next Page
Loading...
Need help?
General
