Soulution 710 - Trouble Shooting; Error Conditions and Actions; Handling Unidentified Errors

soulution
nature of sound
Seite 18
6
66
6 Trouble shooting
Trouble shootingTrouble shooting
Trouble shooting
Error
ErrorError
Error Action
ActionAction
Action
No display
No displayNo display
No display
Check the cabling to the mains supply. Eventually replace the
fuse of your power amplifier 710.
No music
No musicNo music
No music
Check the cabling to your preamplifier and the loudspeakers
,
whether the correct input (SYM/ASYM) is activated, whether
the
preamplifier is switched on and if the right source has been se-
lected. Check whether output signal at your source and pream-
plifier is available. (Mute, Pause, etc.).
ERR
ERRERR
ERR1..3
1..31..3
1..3 after
after after
after
switch on
switch onswitch on
switch on
Switch off the mains of your power amplifier 710 for 15 sec-
onds and switch on again. If the error has not disappeared
please contact your soulution dealer.
ERR
ERRERR
ERR1
11
1..3
..3..3
..3 for
forfor
for
OFF
OFF OFF
OFF -
--
->
> >
> ON
ONON
ON
Check the cabling, the mains voltage (Over-/Under voltage
) and
the level of the input signal.
If the error has not disappeared please contact your soulution
dealer.
ERR
ERRERR
ERR1..3
1..31..3
1..3 in o
in oin o
in op-
p-p-
p-
eration
erationeration
eration
Switch off the mains of your power amplifier 710 for 15 sec-
onds and switch on again. If the error has not disappeared
please contact your soulution dealer.
6.1
6.16.1
6.1 Actions after the appearance of an error
Actions after the appearance of an errorActions after the appearance of an error
Actions after the appearance of an error
If you con not identify the error please disconnect the mains supply (before you dis-
connect the power amplifier 710 has to be in operating condition OFF) and contact
your soulution dealer.