Soulution 710 - Quick Start Guide; Unpacking; Positioning; Cabling

Power
PowerPower
Power Amplifier
AmplifierAmplifier
Amplifier 710
710710
710
User Manual
Page 5
1
11
1 Quick start
Quick startQuick start
Quick start
Unpacking
UnpackingUnpacking
Unpacking
Unpack the power amplifier 710 and store the packing for fu-
ture transportations.
Security advice: Never lift the power amplifier
710
by yourself. Take the required precautions for the trans
port
of an apparatus of this weight. (ca. 80 kg)
Positioning
PositioningPositioning
Positioning
Position the power amplifier 710 on a stable base
that is able to
support min. 80kg.
Security advice: Cooling air must be able to circu-
late and escape unrestricted.
Cab
CabCab
Cabling
lingling
ling
Disconnect all electrical appliances of your HiFi-
system from the
mains supply. Connect your power amplifier 710 with your pre-
amplifier (according to user manual).
Use the respective signal
cables and the cable for the LINK-system. Connect the
power
amplifier 710 with your loudspeakers. Reconnect the
power
amplifier 710 and all other components of your HiFi-
system
with mains supply. Please use
the enclosed high class mains
cable.
Security advice:
While manipulating with cables the
power amplifier 710
has to remain disconnected from the
mains. Check the cables for tight fit or eventual d
amages of
the cables potentially leading to short circuits.
S
SS
Settings
ettingsettings
ettings
Define the brightness of the display, the start-
input as well as
the start-mode.
Security advice: Start-
mode ON should only be used
if the power amplifier 710 cannot be controlled vi
a the
front-panel and the LINK-connection is not available.
Switch
SwitchSwitch
Switch on
on on
on
Switch on your source devices and preamplifier.
Turn down the
volume of the preamplifier to a minimal level.
Switch on your
power amplifier 710.
Security advice: Before you switch on your
power
amplifier 710 for the first time the Start-
Mode must be
OFF.