SoundCraft EFX User Manual

34
Soundcraft EFX/EPM User Guide Issue 1210
FACTORY RESET
Use this function if you want to erase all program data and restore the effects processor to its factory state. To
perform a Factory Reset press and hold the STORE button while powering up the console. Once the effects
processor has initialized (after three seconds), then release the STORE button and the effects processor will
be restored to its factory state.

SoundCraft EFX Specifications

General

Channels quantity	10 channels

Weight and Dimensions

Depth	362 mm
Width	91 mm
Height	330 mm
Weight	4600 g