SoundCraft MPMI - MPMI Typical Specifications

31
MPMi TYPICAL SPECIFICATIONS
Frequency Response
Mic / Line Input to any Output ...........................................+/-1.5dB, 20Hz – 20kHz
T.H.D.
Mic Sensitivity -30dBu, +14dBu @ Mix output .............................< 0.01% @ 1kHz
Noise
Mic Input E.I.N. (maximum gain) ............................………..-126.5dBu (150Ω source)
Aux, Mix and Masters (@ 0dB, faders down)....................................………< -82dBu
Crosstalk (@ 1kHz)
Channel Mute...............................................................................................> 90dB
Aux Send Pots Offness..................................................................................> 82dB
EQ (Mono inputs)
HF ..................................................................................................12kHz, +/-15dB
MF (swept).......................................................................150Hz – 3.5kHz, +/-15dB
LF......................................................................................................80Hz, +/-15dB
Q (MF)........................................................................................................................1.5
EQ (Stereo inputs)
HF ..................................................................................................12kHz, +/-15dB
MF……………………………………………………………….............………..720Hz, +/-15dB
LF .....................................................................................................80Hz, +/-15dB
Q (MF)........................................................................................................................0.8
Power Consumption.........................................................................Less than 40W
Operating Conditions
Temperature Range..............................................................................5°C to 40°C
Input & Output Levels
Mic Input .............................................................................................+15dBu max
Line Input.............................................................................................+30dBu max
Stereo Input ........................................................................................+30dBu max
Mix Output ..........................................................................................+20dBu max
Headphones (@150Ω) (recommended impedance 32 to 200Ω)...................300mW
Input & Output Impedances
Mic Input ...........................................................................................................2kΩ
Line Input ........................................................................................................10kΩ
Stereo Input ....................................................................................................45kΩ
Outputs ......................................................150Ω (balanced), 75Ω (unbalanced)
E & OE.
Soundcraft reserves the right to change specifications without notice.