SoundCraft Signature 16 User Manual

16, 22, 22MTK User Manual
8.2: REVERBS
LEXICON FX > REVERBS
8.2: REVERBS
GATED
A gated reverb uses a threshold setting to abruptly cut o the reverberant field, producing a distinctive eect
often used on pop percussion.
Parameter 1: Liveliness
Parameter 2: Decay Time
SPRING
A Spring reverb is created by a pair of piezoelectric crystals — one acting as a speaker and the other acting as a
microphone — connected by a simple set of springs. The characteristic ‘boing’ of a spring is an important
component of many classic rock and rockabilly guitar sounds.
Parameter 1: Liveliness
Parameter 2: Decay Time
HALL & CHORUS
A hall reverb combined with chorus eect to thicken up the reverberant field.
Parameter 1: Decay Time
Parameter 2: Modulation Speed
PLATE & CHORUS
A plate reverb combined with chorus eect to thicken up the reverberant field.
Parameter 1: Decay Time
Parameter 2: Modulation Speed
HALL & DELAY
A hall reverb combined with a delay eect.
Parameter 1: Decay Time
Parameter 2: Delay Time
PLATE & DELAY
A plate reverb combined with a delay eect.
Parameter 1: Decay Time
Parameter 2: Delay Time

SoundCraft Signature 16 Specifications

General

Type	Analog
Channels	16
Mic Preamps	12
Aux Sends	4
Faders	100mm faders
Phantom Power	Yes
Subgroups	4
Headphone Outputs	1 x 1/4"
EQ Bands	3-band
Inputs - Line	8 x 1/4"
Inputs - Other	2 x RCA
Outputs - Main	2 x XLR
Outputs - Other	4 Aux
Main Outputs	2
Monitor Outputs	2 x 1/4"