IR6000 / English Instruction Manual
6
System Information
View details of units and of connected network. The information includes MAC address
which you are required to fill in when registration of “My mediaU” membership.
CONFIGURATION
Time Display Analog/Digital (time display)
My MediaU When it is enabled, “My mediaU” will exist on the main menu. If various “My
mediaU” accounts exist in the radio, select the default login account in here.
Network Wireless Network Configuration: The system will automatically select the
required AP. Enter WEP or WPA code to connect the WiFi.
Wireless Network (WPS PBC): If you are using a router with WPS/QSS
button, you may set up the network connection simple via WPS function.
Enter it and go to press the WPS/QSS button on your router within 120
seconds. The connection between the router and the unit will then be
configured automatically.
Manual Configuration: You can choose DHPC (which IP assigned
automatically) or manually input IP address for wireless network connection.
When you select manual setting for wired connection, the following have to
be entered: SSID (name of access point), IP Address, subnet mask, default
gateway, preferred DNS server and alternate DNS server.
Check Network When Power On: Enable/disable WiFi network. When you
enable the WiFi network, the system will automatically search the available
AP and select the required AP.
Date & Time Set date and time
Set time format display as 12 Hour or 24 Hour
Set date format (YYYY/MM/DD - DD/MM/YYYY - MM/DD/YYYY)
Alarm There are three independent alarms - 2 alarms of absolute time setting
(Alarm1 and Alarm2) and one alarm for relative time setting (Alarm NAP).
The first two alarms are similar to the normal alarm, turn on then set the
time and set it alarms Everyday, Once or every specific day of week.
Select Alarm time. Set the respective values by the reel on the device and
switch to the next entry field. Confirm by pressing the reel.
Choose Sound to set the sound to Beep, Melody or Internet Radio. An
alarm symbol will appear on the top of the display next to the time.
Note: When the alarm is reached the unit connects to the Internet if the set
network is available. Therefore there may be some delay from the alarm to
the radio play. If no network is connection can be established within one
minute, the alarm will change to Melody automatically.
To Next Page
Loading...
