SOUNDMASTER UR190 - System Menu

UR190 / English Instruction Manual
8
Deactivating a sounding alarm
Press „ON/OFF” (1) or “ALARM” (4) to switch the radio to standby mode.
Snooze
 To temporarily silence a sounding alarm, press “SLEEP/SNOOZE” (5).
 To change the snooze period, press “SLEEP/SNOOZE” (5) repeatedly.
 The snooze period can be selected according to the duration of the alarm (see chapter “Setting alarms”).
Duration of alarms
Selectable snooze periods
15 min
5, 10 min
30 min
5, 10, 15 min
45 min
5, 10, 15, 30 min
60 min
5, 10, 15, 30 min
90 min
5, 10, 15, 30 min
120 min
5, 10, 15, 30 min
Note: If the remaining duration of the alarms is shorter than 10 minutes, the only selectable snooze period is 5
minutes. If the remaining duration is shorter than 5 minutes, the snoozer period cannot be set.
 The radio will return to standby mode during the snooze period. The alarm will sound again when the
snooze period is over.
 To cancel the snooze period and the alarm, press “ON/OFF” (1).
Sleep
This sleep function defines the duration of time before the radio switches itself off automatically.
1. When the radio is switched on, press “SLEEP/SNOOZE” (5) repeatedly to select a sleep period (Options: Off,
15, 30, 45, 60 and 90 minutes).
2. Press “SELECT“ (12) to confirm the selection.
Once a sleep period is set, the sleep icon ( ) will show on the display. The radio will automatically switch off when
the sleep period is over.
SYSTEM MENU
To access the system menu:
1. Press „MENU” (3) in DAB or FM mode.
2. Rotate “SELECT“ (12) to cycle through the options until you see “System”.
3. Press “SELECT“ (12) to confirm the selection “System”.
4. Rotate “SELECT“ (12) to cycle through the below options.
 Equaliser
 Time
 Backlight
 Inactive Standby
 Language
 Factory Reset
 Software Version
See below for details of each option.