Soundstream Reference Class A 3.0 User Manual

d INSTALLATION STEP 1
SETTING THE
HIGH PO WERLHIGH CURRENT SWITCH
The High Power/High Current switch allows the REFERENCE Class A amplifier
to be one of two types of amps: either producing maximum power at higher
impedances (perfect for satellites) or at lower impedances (usually with multiple
subwoofers).
The circuit operates by selecting a set of power supply voltage rails best suited
to your particular application.
One is a higher voltage “tap” optimized for high
impedance applications while the other is lower voltage designed to provide
more current. Unlike other amplifiers, Soundstream’s REFERENCE Class A
amplifiers can be configured to drive virtually any impedance and make
maximum power!
POWER
I
4 R stereo
2 n stereo 1 SI Stereo
112 51 Stereo
l/4 n Stereo
(8 0 Bridged)
(4 i2 Bridged) (2 n Bridged) (1 R Bridged) (l/2 R Bridged)
REFERENCE C/ass A 3.0
High Power
Watts
High Current
Watts
25 x 2
50x2
(50 x 1)
(100 x 1)
12.5 x 2
25x2
(25 x 1)
(50 x 1)
REFERENCE C/cm A 6.0
100x2
150x2
(200x1)
(300 x 1)
50x2
100x2
(100 x 1)
(200 x 1)
n/a
150x2
(300 x 1)
High Power 50x2
100x2 200x2
300x2 nla
Watts
(100 x 1)
(200x1) (400 x 1)
(600 x 1)
High Current 25x2
50x2 100x2
200x2
300 x 2
Watts
(50 x 1)
(100 x 1) (200 x 1)
(400 x 1) (600x1)
12

Soundstream Reference Class A 3.0 Specifications

General

Brand	Soundstream
Model	Reference Class A 3.0
Category	Amplifier
Language	English