Need help?Do you have a question about the Soundstream SA 164 and is the answer not in the manual?
General| Brand | Soundstream |
|---|---|
| Model | SA 164 |
| Category | Amplifier |
| Language | English |
Explains the numbered components of the SA-80 amplifier's top, side, and underside views.
Used for sending only low-frequency information to subwoofers.
Used for sending mid/high frequencies to satellite/coaxial speakers.
Explains the numbered components of the SA-164 amplifier's top, side, and underside views.
Explains Stereo, Mixed-Mono, and Bridged Mono input configurations.
Details minimum wire gauge and required fuse/breaker values for safe operation.
Covers amplifier location, physical mounting, and cable wiring procedures.
Steps for safely powering up the amplifier and checking the LED indicator.
Diagram showing SA-80 in stereo mode driving speakers in full range.
Diagram showing SA-80 in bridged mono mode driving speakers in low pass.
Diagram showing SA-164 with 4 channels of input for full range output.
Diagram showing SA-164 with mixed crossover and mono inputs.
Addresses issues like no sound, blown fuses, thermal protection, and input settings.
Details power ratings, signal-to-noise, frequency response, and crossover settings.
Provides physical dimensions for both SA-80 and SA-164 models.
Diagram illustrating parallel connection of two 4 ohm speakers for a 2 ohm load.
Diagram illustrating series connection of two 4 ohm speakers for an 8 ohm load.
To Next Page