Soundstream Stealth 1200D User Manual

MOUNTING AMPLIFIER
5. The bottom amplifier is now mounted.
6. Stack two amplifiers. Prepare another two side bars with nuts. Then clamp two side
bars between two amplifiers as in Fig8, make sure there’s a gap about 1/4 inch between
two amplifiers. Fasten the side bar as in step 4 with supplied screws.
Fig 7. Mounted bottom amplifier
Fig 8. Stack two amplifiers.

Soundstream Stealth 1200D Specifications

General

Brand	Soundstream
Model	Stealth 1200D
Category	Car Amplifier
Language	English