Need help?Do you have a question about the Soundstream VHD-9 and is the answer not in the manual?
General| Brand | Soundstream |
|---|---|
| Model | VHD-9 |
| Category | Car Video System |
| Language | English |
Explains the meaning of warning symbols like lightning bolts and exclamation points.
Advises on safe placement of monitors to avoid obstructing airbags or driver control.
Instructions for handling liquid spills on the product to prevent damage or injury.
Addresses common problems like no sound or remote control malfunction with solutions.
Provides steps to resolve moisture or condensation issues on the monitor lens.
Recommends professional installation by qualified and certified technicians for optimal performance.
Warns against touching the unit during lightning to prevent electric shock.
Caution against blocking heater ducts or vents to prevent fire or electric shock hazards.
Alerts users that prolonged monitor use without the engine running can drain the vehicle's battery.
Specifies the product's compatibility with 12 Volt DC negative ground vehicles only.
Advises to keep magnetic devices away from the unit to prevent data corruption.
Specifies the acceptable operating temperature range for the product.
Advises users not to attempt repairs and to refer servicing to qualified personnel.
Warns about hazardous radiation from the laser beam and stresses correct operation.
Caution against interrupting power during disc playback to prevent player damage.
Details how to turn the monitor system on and off using the unit or remote control.
Explains how to switch between input modes like AV1, AV2, and DVD using the screen or remote.
Guides through removing the old headrest, adjusting posts, and positioning the new unit.
Explains how to use adapter tubes when the seat mounting holes are too large for the posts.
Details how to connect the red (ACC), black (ground) wires and video/audio cables.
Explains how to adjust CONTRAST, BRIGHTNESS, COLOR, and FM settings via the menu.
Details the functions of each button on the remote control for DVD playback operations.
Instructs how to switch between A/V Source 1 and A/V Source 2.
Explains how to turn the monitor system on and off.
Turns the DVD Player/Monitor on or off.
Increases or decreases the audio volume level.
Switches between DVD, AV1, and AV2 input modes.
Opens the on-screen menu for monitor and DVD player setup and control.
Switches between DVD, SD, and USB modes.
Displays the Setup menu for configuring unit settings.
Used to increase or decrease the volume level.
Guides on how to select AV1 or AV2 modes for viewing external devices.
Adjusts CONTRAST, BRIGHTNESS, COLOR, and FM settings using the menu and arrow buttons.
Explains how to access and navigate the main setup menu.
Covers settings like TV Display, Angle Mark, OSD Language, and Screen Saver.
Sets the TV display format (Normal/PS, Normal/LB, Wide) for optimal viewing.
Allows adjustments to various picture quality elements like Color, Brightness, Contrast.
Provides access to Speaker Setup, SPDIF, Dolby Digital, and Equalizer settings.
Enables or disables the Password function for Parental Controls.
Allows changing the current passcode, with a factory default of 136900.
Guides through setting up Dolby Digital audio, including Dual Mono and Dynamic options.
Allows adjustment of audio equalization for different sound profiles.
Limits playback to content at or below a certain movie rating.
Resets all setup menu settings to factory defaults, except specific values.
Adjusts the contrast level to affect the ratio of bright and dark screen sections.
Enables or disables the Password function for Parental Controls.
Allows changing the current passcode, with a factory default of 136900.
To Next Page