Source Audio L.A. Lady Overdrive - Treble Knob and Reassignment; Effect Switch and External LED

SA244 L.A. Lady Overdrive User’s Guide 10
Treble Knob
The TREBLE KNOB adjusts a high shelf tone control. Turning the knob clockwise will boost the treble;
turning the knob counter-clockwise will cut the treble. The function of this knob can be reassigned
using the Neuro App.
Knob Reassignment
Using the Neuro App, the functions of the Bass Knob and Treble Knob can be reassigned to other
parameters:
 Bass Level or Treble Level (Default) – Controls the amount of boost or cut in the bass or
treble band, respectively.
 Treble Frequency – Sets the frequency for the shelf of the treble band.
 Bass Frequency – Sets the frequency for the shelf of the bass band.
 Mid A Level – Controls the amount of boost or cut in the Mid A band.
 Mid A Frequency – Sets the center frequency of the Mid A peaking filter band.
 Mid A Level – Controls the resonance of the Mid A peaking filter band.
 Mid B Level – Controls the amount of boost or cut in the Mid B band.
 Mid B Frequency – Sets the center frequency of the Mid B peaking filter band.
 Mid B Level – Controls the resonance of the Mid B peaking filter band.
 Clean Mix – Controls the amount of clean signal on the output.
 Distortion Mix – Controls the amount of distorted signal on the output.
 Voice – Controls a midrange “voice” boost or cut that changes the character of the distortion.
 Voice Frequency – Sets the center frequency of the Voice control.
Effect Switch
Selects between the three basic Overdrive circuit types – Classic, Crunch, and Smooth. These effects
are described in further detail in the Effect Types section.
LEDs
Engage / Bypass LED
The ENGAGE / BYPASS LED above the footswitch indicates if the Overdrive effect is active (lit green) or
bypassed (not lit).
When the user preset mode is enabled, the LED will turn red. See the Preset Storage and Recall
section for more information about user presets.
External Control LED
The small LED located between the Depth and Speed knobs is the EXTERNAL CONTROL LED. When lit, it
indicates that external control mode (expression, hot hand, or MIDI) is active. For more information,
see the External Control section.
Footswitch
Enables or bypasses the Overdrive effect.