Source Audio L.A. Lady Overdrive - Stereo Routing

SA244 L.A. Lady Overdrive User’s Guide 13
Series / Parallel Hybrid
By selecting the MONO IN/OUT WITH CASCADING CHANNELS routing option and bringing up the clean mix
level on channel B, it’s possible to create a series/parallel hybrid sound, as shown in the image
below:
Stereo Routing
The L.A. Lady works great as a mono Overdrive effect, but its stereo inputs and outputs also make it a
true stereo effect as well as a flexible signal router. It can act as a stereo splitter, merger, or true
stereo effect, and it can also be set up in a number of other unique signal routing modes. By default,
the L.A. Lady works in true stereo mode (INPUT 1 goes to OUTPUT 1, and INPUT 2 goes to OUTPUT 2). To
configure a different stereo routing mode, use the Neuro App.
A few different routing options are displayed below. The right side of each diagram shows inputs 1
and 2, the left side shows outputs 1 and 2, and the distortion and EQ circuits (labeled A and B) are in
the center.
Mono (Default – Auto Select): INPUT 1 goes to distortion circuit A and out to OUTPUT 1.
Parallel
1
1
A
EQ
A
B
EQ
B
From Guitar
To Amp
Parallel (Stereo)
1
A
EQ
A
B
EQ
B
1
2
From Guitar
To Amp (R)
To Amp (L)
Series + Parallel Hybrid
A
1
1
B
EQ
A
EQ
B
From Guitar
To Amp
A
1
EQ
A
1
Mono
From Guitar
To Amp