SA244 L.A. Lady Overdrive User’s Guide 3
Quick Start
Power
To power the unit, connect the included 9V DC power supply to the jack labeled DC 9V on the back
panel.
Warning: Using a non-Source Audio supply, especially an unregulated supply, could damage the unit.
Please be very cautious when using 3
rd
-party power supplies.
Guitar/Audio Connections
Using standard ¼” mono cables, connect your guitar, bass, or other instrument to the INPUT 1 jack
and your amp (or the next audio device in the signal chain) to the OUTPUT 1 jack.
When the power and audio connections have been made, the L.A. Lady is ready to play.
Brief Knob, Footswitch, and Button Descriptions
Drive Knob: Controls the amount of gain into the overdrive circuit, which sets the amount of
distortion and sustain.
Level Knob: Controls the overall output level.
Bass Knob: Controls the level of the bass frequencies in the drive circuit.
Treble Knob: Controls the level of the treble frequencies in the drive circuit.
Effect Switch: Selects between the three basic Overdrive effect types – Classic, Crunch, and Smooth.
Footswitch: Enables or bypasses the Overdrive effect. The ON/OFF LED will be lit green when the
Overdrive effect is engaged.
To Next Page
Loading...
