SA244 L.A. Lady Overdrive User’s Guide 9
Controls
Knobs
Drive Knob
The DRIVE KNOB adjusts the amount of gain applied to the signal. Dial down the drive for a cleaner,
more articulate tone or crank it up for over-the-top doses of overdrive.
Level Knob
Adjusts the output level of the effect. This is useful for setting the level of the overdrive effect
compared to the bypassed signal. Note that because the overdrive effect compresses the signal in
the clipping/saturation stage, the dynamic range of the distorted signal will be less than the dry
signal, and the LEVEL KNOB can be used to compensate for the loss of level that results from this
compression.
Bass Knob
The BASS KNOB adjusts a low shelf tone control. Turning the knob clockwise will boost the bass;
turning the knob counter-clockwise will cut the bass. The function of this knob can be reassigned
using the Neuro App.
Drive Knob
Effect Switch
Bass Knob
Level Knob
Treble Knob
Engage/Bypass
LED
Engage/Bypass
Footswitch
Control LED
Control Input Button
To Next Page
Loading...
