Source Audio L.A. Lady Overdrive - External Loop Pre;Post Effect

SA244 L.A. Lady Overdrive User’s Guide 15
External Loop Pre-Effect: The external loop options allow an external effect (whether a Source Audio
product or a third-party product) to be connected to the L.A. Lady’s INPUT 2 and OUTPUT 2. When the L.A.
Lady is bypassed, the external effect will be out of the circuit. When the L.A. Lady is enabled, the
external effect will be put in series with the L.A. Lady’s distortion circuit. OUTPUT 2 should connect to the
external effect’s input, and the external effect’s output should connect to INPUT 2.
In Pre-Effect mode, the guitar signal will go to the external effect first, and then the L.A. Lady’s distortion
circuit second.
In Post-Effect mode, the guitar signal will go to the L.A. Lady’s distortion circuit first, and then to the
external effect second.
Mono, Dry Thru
2
A
1
EQ
A
1
From Guitar
To Amp (R)
To Amp (L)
External Loop Pre-Effect
X
1
2
1
2
A
EQ
A
External Loop Post-Effect
X
1
2
1
2
A
EQ
A