SA244 L.A. Lady Overdrive User’s Guide 28
Hardware Options
This screen shows some advanced options.
Effect Bypass Mode
Selects which bypass path will be used for presets that use hardware bypass mode.
True Bypass (Relay) uses two relays for true bypass switching.
Active Analog (Buffered) bypass uses a buffer to help prevent signal loss and clicking.
MIDI Channel (Device ID)
Selects which channel (1 to 16) the hardware will respond to on Hub and USB-MIDI inputs. Note that
some manufacturers begin counting MIDI channels at zero (from 0 to 15), while the Source Audio
Neuro App uses the convention of counting from 1 to 16.
Preset Mode (Soundblox 2 Mode)
Enables the preset saved in memory to be loaded each time the effect is enabled using the
footswitch. This loads all settings from the preset and ignores the knob positions. When Preset Mode
is enabled, the main LED will be red instead of green. Preset Mode can also be enabled/disabled by
pressing and holding the footswitch for a few seconds.
Factory Reset
Resets the internal memory (including all presets and effect types) to the factory default settings.
To Next Page
Loading...
