Source Audio Mercury Flanger - Page 17

SA240 Mercury Flanger User’s Guide 17
The EQ consists of four independently configurable bands:
 Band 1: Low Shelf
 Band 2: Peaking (a.k.a. Bell / Band)
 Band 3: Peaking (a.k.a. Bell / Band)
 Band 4: High Shelf
Each band has configurable frequency, boost/cut, and Q (bandwidth).
A simple example of these four bands in action is shown in the graph below. In this example, Band 1
is a low shelf filter at 100 Hz with a 6 dB cut, Band 2 is a peaking filter at 620 Hz with a 3 dB cut and
relatively high Q, Band 3 is a peaking filter at 3 kHz with a 1.5 dB boost and relatively low Q, and Band
4 is a high shelf filter at 10 kHz with a 2.5 dB cut.
Using the Neuro App or USB Editor, Band 1 (Low Shelf) can optionally be configured as a high pass
filter, and Band 2 (High Shelf) can optionally be configured as a low pass filter.
50 100 200 300 500 1.0k 2.0k 3.0k 5.0k 10.0k 20.0k
-6
0
+6
1
2
3
4
Parametric Equalizer