Menu item Description
Print Configuration
Font Sharpening
0–150 (24*)
Set a text point-size value below which the high‑frequency
screens are used when printing font data.
For example, if the value is 24, then all fonts sized 24 points or
less use the high‑frequency screens.
Print Configuration
Print Density
Disabled
1–5 (3*)
Adjust the toner density when printing or copying documents.
Print Configuration
A4 Fuser
Compress*
Clip
Select the fuser to use.
Device Operations
Quiet Mode
O*
On
Set the printer to operate in Quiet Mode.
Note: Enabling this setting slows down the printer
performance.
Device Operations
Panel Operations
O
On*
Enable access to the control panel menus.
Device Operations
Minimum Copy Memory
80 MB*
100MB
Set the memory allocation for storing copy jobs.
Notes:
• The values appear only if the amount of installed DRAM
is at least twice the amount of the value.
• This menu item appears only in some printer models.
Device Operations
Safe Mode
O*
On
Set the printer to operate in a special mode, in which it attempts
to continue oering as much functionality as possible, despite
known issues.
For example, when set to On, and the duplex motor is
nonfunctional, the printer performs one‑sided printing of the
documents even if the job is two‑sided printing.
Device Operations
Clear Custom Status
Erase user‑defined strings for the Default or Alternate custom
messages.
Device Operations
Clear all remotely‑installed messages
Erase messages that were remotely installed.
Device Operations
Automatically Display Error Screens
On*
O
Show existing error messages on the display after the printer
remains inactive on the home screen for a length of time equal
to the Screen Timeout setting.
Note: An asterisk (*) next to a value indicates the factory default setting.
Understanding the printer menus 53
To Next Page
Loading...
