South-Tek Systems BEERBLAST 7 KPH User Manual

BeerBlast™ 7/14KPH & N2-GEN™ 7/14KPH O&M South-Tek Systems
24
4.11 ACCESS CONTROLS
The built in controller is fully programmed to function without requiring the user to input any values. Do not attempt
to modify the program or the warranty will be voided. In case of the program failure, first attempt to cycle the power
to the system. If that does not work, please contact your provider for further instructions.
4.12 STARTING THE SYSTEM
To start the system, turn on the power switch and make sure any valves to the gas lines are in the open position.
4.13 STOPPING THE SYSTEM
To stop the system, close off any valves on the gas lines. Powering down the system is not necessary.

South-Tek Systems BEERBLAST 7 KPH Specifications

General

Brand	South-Tek Systems
Model	BEERBLAST 7 KPH
Category	Inverter
Language	English