BeerBlast™ 7/14KPH & N2-GEN™ 7/14KPH O&M South-Tek Systems
7
2 SAFETY GUIDELINES
2.1 GENERAL
Correct use of the BeerBlast™ 7/14KPH / N2-GEN™ 7/14KPH is important for your personal safety and for trouble-
free functioning of the BeerBlast™ 7/14KPH / N2-GEN™ 7/14KPH. Incorrect use can cause damage to the
BeerBlast™ 7/14KPH / N2-GEN™ 7/14KPH / 7KPH or can lead to incorrect gas supply.
The BeerBlast™ 7/14KPH / N2-GEN™ 7/14KPH produces a gas blend of Carbon Dioxide (CO2) and Nitrogen (N2)
at a low flow rate, which quickly dissipates into the air. CO2 and N2 gases are not poisonous but they should not be
directly inhaled, since in high concentrations, they can cause asphyxiation. Ensure that the unit is installed
within a well-ventilated room, one that is not sealed off from normal living space air changes.
All personnel involved with installation, operations, and maintenance of the BeerBlast™ 7/14KPH / N2-GEN™
7/14KPH must follow safe working practices, OSHA, and local health/safety code regulations during the installation,
operation, and maintenance of the unit.
Warning:
This manual must be read in its entirety to installing and operating the BeerBlast™ 7/14KPH / N2-GEN™
7/14KPH to prevent accidents and damage to the BeerBlast™ 7/14KPH / N2-GEN™ 7/14KPH.
Contact your supplier if you detect a problem that you cannot solve with this manual.
Only use the BeerBlast™ 7/14KPH / N2-GEN™ 7/14KPH in accordance with its designed purpose.
Only service-engineers, that are qualified to work on electric and pneumatic equipment, are allowed to do
the installation, maintenance and repairs. Unqualified people are not allowed to repair the equipment.
Do not tamper or experiment with the equipment or exceed the technical specifications
To Next Page
Loading...
Need help?
General
