NOTES
Do not use the printer any way other than described here in in order to avoid personal injury or property damage.
Do not use any other power cable except the one supplied. Always use a grounded three-prong power outlet.
Please do not open the plastic cover during usage, otherwise the printing will be interrupted.
Do not wear cotton gloves when operating the printer. Such cloths may become tangled in the printers moving parts leading to burns,
possible bodily injury, or printer damage.
Please wait a moment after the print is finished. And please wear gloves to take out the print by tools.
Clean the printer frequently. Always turn the power off when cleaning, and wipe with a dry cloth to remove dust, adhered printing
plastics or any other material off the frame, guide rails, or wheels. Use glass cleaner or isopropyl alcohol to clean the print surface.
Children under 10 years should not use the printer without supervision.
This machine is equipped with a security protection mechanism. Do not manually move the nozzle and printing platform mechanism
manually while booting up, otherwise the device will automatically power off for safety.
Users should comply with the laws and regulations of the corresponding countries and regions where the equipment is located (used),
abide by professional ethics, pay attention to safety obligations, and strictly prohibit the use of our products or equipment for any illegal
purposes. Sovol will not be responsible for any violators' legal liability under any circustance.
Do not place the printer in the environment with large vibration or other instability. The shaking of the machine will affect the printing
quality of the printer.
Please do not place the machine in inflammable and explosive materials or near high heat source. Please place the machine in a
ventilated, cool and dust free environment.
It is recommended to use the material recommended by the manufacturer to avoid machine damage.
It’s not recommended to use the third party firmware or mainboard etc, or the warranty will be void.
To Next Page
Loading...
