Circuit Wiring 16
Additional resources and information:
This manual is designed for SV01 Pro
owners to start their SV01 Pro printing
journey.We still recommend all the SV01
Pro owners to read the manual carefully
even if you are familiar with the 3D Printing
technology, as there is lots of important
information about the SV01 Pro for you to
learn and help you get better printing
exprience. In this manual there are tutorial
sdocument can be found on official website
and group you can scan the QR-codes or
click the link to get them.
Dear Consumers：
Please login the official website
https://sovol3d.com/pages/download,
switch the language and select the relevant
printer and model and download the required
firmware, you can use it after the installation is
finished.
Firmware Upgrade：
Equipment Wiring 07
Introduction 01
Parts List 03
Install Gantry Components 04
Install the Material Rack 05
Install the Touch Screen 06
Start Printing 13
Equipment Parameters 02
Interface Information 09
Bed Leveling 10
Load Filament 11
Printer Maintenance 15
Contents：
Trouble Shooting 17
To Next Page
Loading...
