Introduction SY-5EMM
20
Step 6. DRAM Module Installation
This mainboard supports two strips of 72-pin 5V FPM/EDO DRAM
(SIMM) from 4 to 64 MB and two strips 168-pin 3.3V/5V Unbuffered
DIMM modules from 8 to 256 MB. The mainboard requires SIMM
modules of at least 70ns access time.
This mainboard supports both EDO and SDRAM types of memory
modules.
Note:
(1) Do not install EDO type of DIMM modules if you already use
SDRAM in any DIMM bank..
l MEMORY CONFIGURATION
This mainboard features 2 x DIMM Banks for 168-pin 3.3V
unbuffered DIMM modules and 2 x SIMM Banks for 72-pin
Your board comes with tow DIMM sockets and two SIMM sockets,
providing support for up to 512MB of main memory using DIMM
To Next Page
Loading...
Need help?
General
