SOYO SY-5EMM - System Boot Control

BIOS Setup Utility SY-5EMM
43
3-2.3 System Boot Control Settings
System Boot
Control Settings
Setting Description Note
Disabled
Quick Power On
Self Test
Enabled Provides a fast POTS at
boot-up.
Default
A, C, SCSI
C, A, SCSI
C, CD-ROM, A
CD-ROM, C, A
D, A, SCSI
E, A, SCSI
F, A, SCSI
SCSI, A, C
SCSI, C, A
C only
Boot Sequence
LS/ZIP, C
Choose the boot
sequence adapted to
your needs, for example:
l [A, C, SCSI] means
the BIOS will look for an
operating system first in
drive A, then in drive C,
and eventually in SCSI
device.
Disabled Default
Swap Floppy
Drive
Enabled Changes the sequence
of A and B drives.
On Puts numeric keypad in
NumLock mode at boot-
up.
Default
Boot Up
NumLock
Status
Off Puts numeric keypad in
arrow key mode at boot-
up.