SOYO SY-5EMM User Manual

BIOS Setup Utility SY-5EMM
44
System Boot Control Settings (continued)
System Boot
Control Settings
Setting Description Note
Normal
Gate A20 Option
Fast Allows RAM access
above 1MB using the fast
gate A20 line.
Default
Enabled This allows to perform a
redundancy check on the
parity bit in the data
strings. This method is
used for error detection
when the parity is not
found.
Default
Memory Parity
Check/ ECC
Check
Disabled
3-2.4 Typematic Settings
Typematic
Settings
Setting Description Note
Disabled Default
Typematic
Rate Setting
Enabled Enables to adjust the
keystroke repeat rate.
The following [Typematic Rate] and [Typematic Delay] fields are
active only if [Typematic Rate Setting] is set to [Enabled]
Typematic Rate
(Chars/Sec)
6 (Char/sec)
8 (Char/sec)
10 (Char/sec)
12 (Char/sec)
15 (Char/sec)
20 (Char/sec)
24 (Char/sec)
30 (Char/sec)
Choose the rate at which
a character is repeated
when holding down a
key.
Default
Typematic Delay
(Msec)
250 (msec)
500 (msec)
750 (msec)
1000 (msec)
Choose how long after
you press a key down the
character begins
repeating.
Default

SOYO SY-5EMM Specifications

General

Brand	SOYO
Model	SY-5EMM
Category	Motherboard
Language	English