BIOS Setup Utility SY-6BA+
42
CHIPSET FEATURES SETUP (Continued)
CHIPSET
FEATURES
Setting Description Note
16 BIT I/O
Recovery Time
1 Use the default setting Default
Disabled Default
Memory Hole At
15M-16M
Enabled Some interface cards will
map their ROM address to
this area. If this occurs,
select [Enabled] in this field.
Passive Release
Enabled Use the default setting Default
Delayed
Transaction
Enabled Use the default setting Default
AGP Aperture
Size
64
4-256MB
AGP could use the DRAM
as its video RAM. Choose
the DRAM size that you
wish to allocate as video
RAM.
Default
Disabled Default
Spread Spectrum
Modulated
Enabled When using Spread
Spectrum Modulated 1.5%
or 6% for FCC or DOC
testing.
To Next Page
Loading...
Need help?
General
