BIOS Setup Utility
SY-7IZB+N
32
3-1 SOYO COMBO SETUP
This Motherboard does not use any hardware jumpers to set the
CPU frequency. Instead, CPU settings are software configurable
with the BIOS [SOYO COMBO SETUP].
After the hardware installation is complete, turn the power switch on,
then press the <DEL> key during the system diagnostic checks to
enter the Award BIOS Setup program. The CMOS SETUP UTILITY
will display on screen. Then, select the [SOYO COMBO SETUP]
option from the main menu and press the <Enter> key.
ROM PCI/ISA BIOS
SOYO COMBO SETUP
AWARD SOFTWARE, INC.
CPU Host/PCI Clock : 100/33 MHz CPU Warning Temperature : Disabled
CPU Frequency : X 5.5 = 550 Mhz Current CPU Temp.
: 28 ½ C / 82 ½
F
SDRAM RAS-to CAS Delay : 3
Current CPUFAN1 Speed : 5433 RPM
SDRAM RAS Precharge Time : 3
Current CPUFAN2 Speed : 0 RPM
SDRAM CAS latency Time : 3
Vcore (V) : 2.01 V 3.3 (V) : 3.4 V
+ 5 (V) : 4.99 V + 12 V : 12.16 V
Boot Sequence : A,C,SCSI -12 (V) : -12.03 V - 5V : -4.94 V
Quick Power On Self Test : Disabled
ESC : Quit
↑ ↓ → ←
: Select Item:
F1 : Help PU / PD / + / - : Modify
F5 : Old Values (Shift) F2 : Color
F7 : Load Setup Defaults
The [SOYO COMBO SETUP] menu combines the main parameters
that you need to configure, all in one menu, for a quick setup in
BIOS.
To Next Page
Loading...
