Hardware Setup
SY-7IZB+N
24
Repeat this operation until you get the following screen.
3. The BIOS Setup screen appears:
ROM PCI/ISA BIOS
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
SOYO COMBO SETUP INTEGRATED PERIPHERALS
STANDARD CMOS SETUP SUPERVISOR PASSWORD
BIOS FEATURES SETUP USER PASSWORD
CHIPSET FEATURES SETUP IDE HDD AUTO DETECTION
PNP/PCI CONFIGURATION SAVE & EXIT SETUP
LOAD KUKA DEFAULTS EXIT WITHOUT SAVING
Esc : Quit ↑ ↓ → ← : Select Item
F10 : Save & Exit Setup (Shift) F2 : Change Color
Time, Date, Hard Disk Type . . .
2-3.18
Quick BIOS Setup
This Motherboard does not use any hardware jumpers to set the
CPU frequency. Instead, CPU settings are software configurable
with the BIOS [SOYO COMBO SETUP]. The [SOYO COMBO
SETUP] menu combines the main parameters that you need to
configure, all in one menu, for a quick setup in BIOS.
After the hardware installation is complete, turn the power switch on,
then press the <DEL> key during the system diagnostic checks to
enter the Award BIOS Setup program. The CMOS SETUP UTILITY
will display on screen. Follow these steps to configure the CPU
settings.
1. Select [LOAD KUKA DEFAULT]
Select the “LOAD SETUP DEFAULT” menu and type “Y” at the
prompt to load the BIOS optimal setup.
To Next Page
Loading...
