Spaceman 6210 - Sanitization Procedures; Sanitizer Preparation and Initial Application

SANITIZATION
Verify assembly
is complete
If installed,
remove hopper lid
and air tube
Mix a minimum of 2
gallons of food-grade
sanitizer in a bucket
or container
Verify draw valve
is in the CLOSED
position (UP)
Pour the food-
grade sanitizer
solution into
hopper
2
3
4
5
1
Always use food-grade, no-rinse sanitizer (Stera-Sheen green label or equivalent)
to sanitize. If warm water is required to dissolve sanitizer, allow the solution time
to cool before adding to machine.
Spaceman USA 6210 Training rev111918