To Next PageTo Next PageWhat to do if my Spaceman Ice Cream Maker won't run?
If your Spaceman Ice Cream Maker won't run, first ensure it is properly plugged in. Also, check the circuit breaker or fuse and reset it if necessary. If the machine has tripped its internal safety mechanism, try resetting the machine.
What to do if the compressor on my Spaceman SM-6450 does not start?
If the compressor on your Spaceman Ice Cream Maker doesn't start, it might be due to the machine tripping the safety motor overload. Try resetting the machine.
Why is my Spaceman SM-6450 Ice Cream Maker leaking product?
If your Spaceman Ice Cream Maker is leaking product, and you find that the drive shaft gasket is the cause, make sure to use sufficient food-grade lubricant inside the drive shaft during assembly. If the gasket is damaged, missing, or incorrect, replace it. Alternatively, the leak can be caused by the draw valve. Ensure sufficient food-grade lubricant is used when assembling the draw valve. If the draw valve is cracked, broken, or worn, replace it.
General| Refrigerant | R404A |
|---|---|
| Air Pump | Yes |
| Pre-Cooling | Yes |
| Hopper Agitator | Yes |
| Voltage | 220V |
Addresses issues with product firmness, softness, and operational failures like non-operation.
Solutions for product dispensing problems, leaks, and unexpected machine shutdowns.
Focuses on drive shaft removal procedures and cylinder wall issues.
Details product information and available custom options for the machine.
Covers electrical requirements and physical dimensions of the unit.
Visual identification of the machine's external parts with labels.
Lists parts for the dispensing door, beater assembly, and control levers.
Visual identification of the machine's internal parts with labels.
Wiring diagram and list of associated electrical components for the SM-6450.
