Seaich Corporation, LLC. All rights reserved. www.seaich.com
|
Spacerails, LLC. www.spacerails.com Page 11
Rail joining for custom designs: To adjust your
designs with the rails, use the Rail Couplings to
increase the length of your rail sections.
Connecting rails to arms: To install the rails, press them
into the arm as shown. You should hear a click when the
rail is locked in place.
Angling the arms: Install the arms at the angle of the
incline the rails will travel along.
Railroad stability: To maintain stability on longer
track segments, attach Rail Clips as needed.
Elevator Exit: When installing the elevator exit rails,
pull the rails close to the Elevator Helix to ensure the
Marble enters the roller coaster smoothly.
Smooth rails for ecient travel: Make sure the
rails connect smoothly and are free of any bumps,
twists, or kinks.
ASSEMBLY TIPS & TRICKS
2
CONSTRUCTING THE ROLLER COASTER
To Next Page
Loading...
