Spacesaver Corporation
a division of KI
U.S.A.: 1450 Janesville Avenue, Fort Atkinson, WI 53538-2798, (920) 563-6362, 1-800-492-3434, FAX: (920) 563-2702
CANADA: 266 King Street East, Toronto, Ontario M5A 4L5, (416) 360-1022, 1-800-544-3679, FAX: (416) 360-7290
UK: Commonwealth House, 148-153 High Holborn, London WC1V 6PJ, (020) 7404-7441, FAX: (020) 7404-7442
WEBSITE: www.spacesaver.com E-MAIL: ssc@spacesaver.com
Copyright ©, 2002 by Spacesaver Corporation. All Rights Reserved. Printed in U.S.A. OP-0205 SSC/ECONO 2/02
A safety overridden move of any carriage within the system will require insertion of the safety
override key in that carriage. Once the safety overridden move is complete the safety override key
must be removed to return the system to normal operation. The safety override key should be kept
by the area supervisor for safety reasons. Once the safety faulted aisle is closed other carriages
within the system may be operated. The safety override key is not required to open a faulted aisle,
only to close it.
USING THE POWER OVERRIDE FUNCTION:
1. The Power Override unit provides a temporary means for
operating your system during times of a power outage.
This unit is not intended to be used as a safety override
devise. Plug the phone jack end into the same opening
used for the safety override key. Toggle the switch on the
side of the unit to initiate either left or right movement.
Please see page 3 in either the PowerPro
®
or Power
Assist Operations Instructions manual for full detail
regarding use and care of the unit.
Note: The override pack must be kept by the Area Supervisor for
security reasons.
To Next Page
Loading...
Need help?
General
