Assemble the Base
13
B
ASSEMBLE THE OVAL POLE
CAUTION
WHEN PROPERLY POUNDED TOGETHER, THE POLE SECTIONS SHOULD HAVE A 3 1/2" (9 CM) OVERLAP.
IF MINIMUM POLE ENGAGEMENT OVERLAP OF 3 1/2" (9 CM) CANNOT BE ACHIEVED !! STOP !! DO
NOT PROCEED TO THE NEXT STEP! - CALL SPALDING CUSTOMER SERVICE AT 1-800-558-5234 FOR
ASSISTANCE.
3. Align the top (4) pole section with the middle (5) pole section and slide together.
4. Bounce the assembled sections on a scrap wood board until the overlap reaches the marked line.
#5
#4
#4
#5
#5
#4
3 1/2"
(9 cm)
To Next Page
Loading...
