SPAN Encore Series - Product Specifications; MC9 R;Encore Bed Features and Specifications

Span Medical Retractable Bed
MC9R / Series
8
MC9R/Encore
®
Bed Features and Specifications
Height Floor to Mattress Support
7-7/8" - 31"
Deck Angles
1. Back Elevation
0 – 70°
2. Knee Elevation
0 – 30°
Bed Length
1. Overall Length
82”, 86”, 90” (with head and foot boards, excluding bumper)
2. Retraction Travel
12"
3. Sleep Surface
76", 80", 84"
Bed Width
1. Overall with Side Rails
40-1/2”, 43-1/2”, 46-1/2”
2. Sleep Surface
35", 39", 42"
Mattress Support Deck Construction
Welded steel tube and slats
Mattress Stops
Steel End and Sides
Bed End Panels
Permanent or removable mounting
Electrical & Mechanical Certification
ANSI/AAMI ES60601-1:2005, Medical electrical equipment
CAN/CSA-C22.2 NO. 60601-1-08 - Medical electrical equipment
CAN/CSA-C22.2 NO. 60601-2-52:11 - Medical Beds
CAN/CSA-C22.2 NO. 60601-1-2-08 - EMC
Classification
Class 1, Type B.
VAC/Hertz/Phase
120/60/1
Maximum Input Current Rating
3.5 Amp (120V).
Cord Type/Length
2.5 Meters minimum, 3 prong hospital grade plug.
Electric Motors
Four (4) DC self-lubricating linear actuators
Operation
10% Maximum Duty Cycle (2 minutes on,18 minutes off)
Emergency Power back-up battery Pack
24V DC Internal or External Battery with Charger.
Ingress Protection Rating
IPX4 (Electrical components IP66)
Audible Acoustic Energy
70 dBA maximum
Weight of Bed
284 lbs (129 kg) without any accessories
Safe Working Load
600 lbs
(Includes weight of accessories, options
and bedding.)
272 kg
Maximum Patient Weight
450 lbs
204 kg
Mobility
At any height (7-7/8" - 31")
Swivel Casters
Heavy duty dual 3" Casters
Environment Conditions
Operating
Temperature
10° C to 40° C
Relative Humidity
30% to 75%
Atmospheric Pressure
700 to 1060 hPa
Storage
Temperature
-10° C to 50° C
Relative Humidity
20 % to 90 % @ 30° C - not condensing
Atmospheric Pressure
700 to 1060 hPa
The MC9R/Encore
®
bed is designed for a safe working load of 600 lbs (272 kg). Body weight should be evenly
distributed over the surface of the bed. Do not lay, sit, or lean in such a way that the entire body weight is placed
only on a raised head or foot section of the bed.