SPAN Encore Series - EMC (Electromagnetic Compatibility); Emissions and Immunity Guidance

Span Medical Retractable Bed
MC9R / Series
26
Guidance and Manufacturer’s Declaration - Emissions
The MC9R/Encore
®
is intended for use in the electromagnetic environment specified below. The
customer or used of MC9R/Encore
®
should ensure that it is used in such an environment.
Emissions Test
Compliance
Electromagnetic Environment - Guidance
RF Emissions
CISPR 11
Group 1
The MC9R/Encore
®
uses RF energy only for its
internal function. Therefore, the RF emissions are very
low and are not likely to cause any interference in
nearby electronic equipment.
RF Emissions
CISPR 11
Class A or B
Class A
Harmonics
IEC 61000-3-2
Class A, B, C, D,
or N/A
N/A
Flicker
IEC 61000-3-3
Complies or N/A
N/A
The MC9R/Encore
®
is suitable for use in all
establishments, other than domestic, and those
directly connected to the public low-voltage power
supply network that supplies buildings used for
domestic purposes.
• Medical electrical equipment needs special precautions regarding EMC and needs to be assembled
and put into service according to the EMC information provided in this manual.
• Portable and mobile RF communications equipment can affect medical electrical equipment.
• The use of accessories, transducers and/or cables other than those specified, with the exception of
those sold by the manufacturer as replacement parts for internal components, may result in increased
emissions or decreased immunity of the equipment or system.
• The equipment or system should not be used adjacent to or stacked with other equipment and that if
adjacent or stacked use is necessary, the equipment or system should be observed to verify normal
operation in the configuration in which it will be used.
EMC (Electromagnetic Compatibility): User Information and Guidance Tables