ReadyWide
®
integrated expansion
ReadyWide
®
expansion is operated by pushing both spring
buttons and sliding the expander in or out until both spring
buttons are seated in the desired holes (please see Fig 8).
WARNING! Ensure that
all the expander pieces are
adjusted to the same width
and that extension length is
equal on either side of the
bed. Failure to do so could
lead to property damage or
personal injury.
Bed Extender (Optional)
Once assembled, the only adjustment required for
extenders is when expanders are also present.
In this case, the extender’s end tubes must be
adjusted in or out, using the spring button,
to correspond to the expander width
(please see Fig 9).
WARNING! POSSIBLE INJURY OR DEATH Use only the proper size mattress and
extension pads in order to minimize the entrapment Zone gaps. The gaps must be small enough to
prevent the patient from getting his/her neck caught in this location (you must read and follow the FDA
Entrapment Guidelines).
To Next Page
Loading...
