Optional - Variable Forward Reach
Operating the Variable forward reach
Before operating the arm, ensure the head is one metre off the ground and at least
two metres away from the tractor. To operate the arm, press rocker switch. This will
push the head forward. Likewise press the rocker switch opposite, the head will
retract backwards. When operating the cutting head close to the tractor extreme care
must be taken to avoid contact with the cab.
Transport of the Variable forward reach
Never attempt transport position without first fully retracting the variable forward
reach arm.
Variable forward reach
This useful feature provides extra
visibility particularly when topping a
hedge, or verge mowing.
Excel 606, 686, 726 & 836
To Next Page
Loading...
