• Ensure flails are of the type recommended by the manufacturer, are securely
fitted and are undamaged.
• Ensure hydraulic pipes are correctly routed to avoid damage from chafing,
stretching, pinching or kinking.
• Disengage the machine, stop the engine and remove the key before leaving
the tractor cab for any reason.
• Clean up any debris left at the work site.
• Ensure that when you remove the machine from the tractor it is secured in a
safe position using the stands provided.
Never
• Never operate the machine with other people present, as it is possible for
debris, including stones, to be discharged from the front and rear of the flail
head.
• Never operate the machine until you have read and understood the relevant
Handbook and are familiar with the controls.
• Never use a machine that is poorly maintained or has guards that are
damaged or missing
• Never allow an inexperienced person to operate the machine without
supervision.
• Never use or fit a machine onto a tractor if it doesn’t meet the manufacturer’s
specification.
• Never use a machine if the hydraulic system shows signs of damage.
• Never attempt to detect a hydraulic leak with your hand, use a piece of card.
• Never allow children to play on or around the machine at any time.
• Never attempt any maintenance or adjustment without first disengaging the
PTO, lowering the head to the ground, stopping the tractor engine and
applying the tractor parking brake.
• Never leave the cab without removing the ignition key.
• Never operate the tractor or any controls from any position other than from
the driving seat.
• Never stop the engine with the PTO engaged.
• Never operate with flails missing.
• Never operate PTO above recommended speed, 540 R.P.M.
• Never operate with wire around the rotor. Stop immediately.
• Never use the head at an angle, which may throw debris towards the cab.
• Never attempt to use the machine for any purpose other than that it was
designed for.
• Never transport with the PTO engaged
• Never enter the working area of the machine (risk of injury!)
• Never transport with the controls live, always turn off electrical isolator switch
(red) and disconnect supply.
Excel 606, 686, 726 & 836
To Next Page
Loading...
