8
Secure
1
Close the Maxle™ lever. Lever tension is sufficient if the lever leaves an imprint on your
hand.
2
To increase lever tension, open the lever and turn it clockwise. Close the lever to
recheck lever tension. Repeat until the tension is sufficient, then close the lever.
When the lever is closed, verify there is no gap between the lever head and dropout.
Remove
1
Open the Maxle lever.
2
Turn the lever counter-clockwise until the Maxle is disengaged from the threads on the
fork drop out, then slide the Maxle out of the hub.
To Next Page
Loading...
