9
Position
1
To change the direction of the Maxle™ lever when it is in the closed position, first remove
the Maxle from the fork leg drop out.
2
With the Maxle lever in the open position, place the flat end of the Maxle vertically on a
hard surface. Use the palm of your hand to push the lever head in to compress the spring
inside the Maxle. While the spring is compressed, rotate the lever head to the desired
position using the numbered lines on the Maxle as a reference.
3
Install, tighten, and secure the Maxle into the lower fork leg. Repeat until your desired
closed lever position is achieved.
To Next Page
Loading...
