Speco HS Rev 1.0 Copyright I-View Now, LLC 2014 8
At the time of writing this manual, the Speco HS’s default USER is “ADMIN” and the PASSWORD is “1111”. The Mouse
can be used to input characters or a keyboard can be attached to the other USB port for character input. First change
the USER and PASSWORD to the settings on the form you should’ve received from I-View. As stated above, the
information on the form will be expected to be set when the I-View system attempts to interface with the Speco HS, so
ensure you change the password to that on the form before proceeding.
Note, if, during setup, you need to start over, the machine can be reset to its factory default state by referring to the
User’s Guide. It is the most up to date reference on configuring the unit as it’s continually updated by the manufacturer
and available on the Speco web site.
To Next Page
Loading...
